Experimental study on the thermal performance and heat transfer characteristics of solar parabolic trough collector using Al2O3 nanofluids
บทความในวารสาร
ผู้เขียน/บรรณาธิการ
กลุ่มสาขาการวิจัยเชิงกลยุทธ์
ไม่พบข้อมูลที่เกี่ยวข้อง
รายละเอียดสำหรับงานพิมพ์
รายชื่อผู้แต่ง: Subramani J., Nagarajan P.K., Wongwises S., El-Agouz S.A., Sathyamurthy R.
ผู้เผยแพร่: Wiley
ปีที่เผยแพร่ (ค.ศ.): 2018
วารสาร: Environmental Progress & Sustainable Energy (1944-7442)
Volume number: 37
Issue number: 3
หน้าแรก: 1149
หน้าสุดท้าย: 1159
จำนวนหน้า: 11
นอก: 1944-7442
eISSN: 1944-7450
ภาษา: English-Great Britain (EN-GB)
ดูในเว็บของวิทยาศาสตร์ | ดูบนเว็บไซต์ของสำนักพิมพ์ | บทความในเว็บของวิทยาศาสตร์
บทคัดย่อ
The present work investigated thermal performance and heat transfer characteristics of a solar parabolic trough collector using Al2O3/DI-H2O nanofluids. Nanofluids of varying concentrations (0.05% ϕ ≤ 0.5%) with mass flows (0.0083–0.05 kg/s) were considered for turbulent regime (2401 ≤ Re ≤ 7202) analysis. Experiments were carried out as per ASHRAE 93(2010) standards. By thermal performance analysis using Al2O3 nanofluid, it was understood that the collector efficiency improved up to 56% at a maximum volume concentration of ϕ = 0.5% and flow rate of 0.05 kg/s. The heat transfer study comparing Al2O3 nanofluid with pure water showed appreciable reduction in temperature gradient and surface temperature of the absorber. The heat transfer characteristics such as Nusselt number and friction factor relating to Reynolds number fits the experimental and predicted data and found within the limits of ±5.35% and ±9.61% for Nusselt number and friction factor respectively. Moreover, a similar empirical correlation was developed for collector efficiency, which was identified to be within the limit of ±1.02%. © 2017 American Institute of Chemical Engineers Environ Prog, 37: 1149–1159, 2018. © 2017 American Institute of Chemical Engineers Environ Prog
คำสำคัญ
aluminum oxide, collector efficiency, solar parabolic trough collector