Development of a sustainability index for an energy management system in Thailand

บทความในวารสาร

ผู้เขียน/บรรณาธิการ

กลุ่มสาขาการวิจัยเชิงกลยุทธ์

ไม่พบข้อมูลที่เกี่ยวข้อง

รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่ง: Nakthong V., Kubaha K.

ผู้เผยแพร่: Elsevier

ปีที่เผยแพร่ (ค.ศ.): 2019

วารสาร: Construction and Building Materials (0950-0618)

Volume number: 11

Issue number: 17

นอก: 0950-0618

eISSN: 1879-0526

URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85072573033&doi=10.1016%2fj.conbuildmat.2019.116962&partnerID=40&md5=d184abc8d72c8e036c49a036ff902ebb

ภาษา: English-Great Britain (EN-GB)

ดูในเว็บของวิทยาศาสตร์ | ดูบนเว็บไซต์ของสำนักพิมพ์ | บทความในเว็บของวิทยาศาสตร์

บทคัดย่อ

Present study evaluates the strength development and shrinkage characteristics of mortars made with a non-cement binder composed of calcium carbide residue and fly ash under several activation techniques. The activation techniques used for improving the strength development were adding NaOH to the binder (0.5, 1.0, and 1.5% by weight of binder), curing at a temperature of 60 ฐC, and combining both adding NaOH and curing at a temperature of 60 ฐC. The compressive strengths of mortars were examined at 3, 7, 28 and 90 days. The shrinkage characteristics of the mortars were evaluated in terms of the autogenous and drying shrinkages. The pore structure of the paste was also analyzed using mercury intrusion porosimetry. The results showed that all of the activation techniques could enhance the compressive strength of mortar and improve the pore structure of the paste made from the mixture of calcium carbide residue and fly ash. The technique to improve strength by combining addition of NaOH and curing at 60 ฐC was found to be the most effective method, and produced the mortar with a compressive strength as high as 51.1 MPa at 90 days. The shrinkage behaviors of the mortar made from the mixture of calcium carbide residue and fly ash were similar to the ordinary Portland cement mortar. The autogenous shrinkage was associated with the internal reaction process, while the drying shrinkage was depended on evaporation of water in pore structures during the drying process. Additionally, the use of NaOH as an activator significantly increased the magnitude of the autogenous and drying shrinkages of mortar. However, the drying shrinkage was greatly reduced with the activation by curing at 60 ฐC. ฉ 2019 Elsevier Ltd

คำสำคัญ

Calcium carbide residue, Compressive strength, Fly ash, Shrinkage