Experimental study of condensation heat transfer on hydrophobic vertical tube

บทความในวารสาร


ผู้เขียน/บรรณาธิการ


กลุ่มสาขาการวิจัยเชิงกลยุทธ์

ไม่พบข้อมูลที่เกี่ยวข้อง


รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่งRajkumar M.R., Praveen A., Arun Krishnan R., Asirvatham L.G., Wongwises S.

ผู้เผยแพร่Elsevier

ปีที่เผยแพร่ (ค.ศ.)2018

วารสารInternational Journal of Heat and Mass Transfer (0017-9310)

Volume number120

หน้าแรก305

หน้าสุดท้าย315

จำนวนหน้า11

นอก0017-9310

eISSN1879-2189

URLhttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85038023557&doi=10.1016%2fj.ijheatmasstransfer.2017.12.019&partnerID=40&md5=5401f1bc84b350976b41e2590294e1b9

ภาษาEnglish-Great Britain (EN-GB)


ดูในเว็บของวิทยาศาสตร์ | ดูบนเว็บไซต์ของสำนักพิมพ์ | บทความในเว็บของวิทยาศาสตร์


บทคัดย่อ

Condensation heat transfer on surfaces can be enhanced by altering the surface topography. Surface modification technology can promote dropwise condensation which can exhibit higher heat transfer rate than filmwise condensation. This paper presents experimental data on the condensation of steam on vertical bare copper tubes and lead coated copper tubes for degree of sub-cooling in the range 0.5 °C ≤ ΔT ≤ 20 °C. The chemical texture of the tube surface was altered by coating with lead of thickness 10 µm and the physical texture of the surface was transformed by providing four grooves each having equal depths 0.10 mm, 0.15 mm and 0.30 mm. The condensation heat transfer characteristics of the tube surface is explained based on contact angle hysteresis and sliding velocity of the droplet. The results of the study reveal that for the tubes tested the average condensation heat transfer coefficient decreases with increase in degree of sub-cooling. It is also found that for copper tubes, providing grooves aids condensation heat transfer for the range of sub-cooling. However, for lead coated copper tube with/without grooves the heat transfer performance at ΔT < 2 °C shows marked difference in contrast to ΔT > 2 °C. © 2017


คำสำคัญ

Contact angle hysteresisDegree of sub-coolingDroplet velocityDropwise condensationHydrophobic vertical tube


อัพเดทล่าสุด 2023-06-10 ถึง 07:36