Experimental Investigation on the Performance of a Parallel Plate-Based Active Magnetic Regenerator

บทความในวารสาร


ผู้เขียน/บรรณาธิการ


กลุ่มสาขาการวิจัยเชิงกลยุทธ์

ไม่พบข้อมูลที่เกี่ยวข้อง


รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่งKeawkamrop T., Dalkilic A.S., Asirvatham L.G., Amani J., Mahian O., Wongwises S.

ผู้เผยแพร่World Scientific Publishing

ปีที่เผยแพร่ (ค.ศ.)2018

วารสารInternational Journal of Air-Conditioning and Refrigeration (2010-1325)

Volume number26

Issue number2

นอก2010-1325

eISSN2010-1333

URLhttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85048436086&doi=10.1142%2fS2010132518500189&partnerID=40&md5=7fdbd6ed37b75835e84faceb0e93c8ce

ภาษาEnglish-Great Britain (EN-GB)


ดูในเว็บของวิทยาศาสตร์ | ดูบนเว็บไซต์ของสำนักพิมพ์ | บทความในเว็บของวิทยาศาสตร์


บทคัดย่อ

This paper describes a prototype of a linear reciprocating magnetic refrigerator using a gadolinium parallel plate. The new design of the regenerator, installation, and experiment is presented. The regenerator consists of a gadolinium plate and an inlet/outlet section. The thickness and length of the gadolinium plate are 1mm and 80mm, respectively. The gap between parallel plates is 0.1mm. Water is used as the heat transfer fluid. The permanent magnet structure used in the present study can generate a maximum magnetic field intensity of 0.94 T. The effects of surface roughness of the gadolinium parallel plate on the temperature span and cooling capacity are investigated. The results show that there is no significant effect of surface roughness on the magnetic refrigerator performance at a high utilization factor. The results from the present study are important for the design of magnetic refrigerators operating at room temperature. ฉ 2018 World Scientific Publishing Company.


คำสำคัญ

gadoliniumMagnetic refrigerationmagnetic refrigerator performanceparallel plate


อัพเดทล่าสุด 2023-29-09 ถึง 10:29