Prediction of hydrothermal behavior of a non-Newtonian nanofluid in a square channel by modeling of thermophysical properties using neural network

บทความในวารสาร


ผู้เขียน/บรรณาธิการ


กลุ่มสาขาการวิจัยเชิงกลยุทธ์

ไม่พบข้อมูลที่เกี่ยวข้อง


รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่งAmani M., Amani P., Bahiraei M., Wongwises S.

ผู้เผยแพร่Springer Verlag (Germany) / Akadémiai Kiadó

ปีที่เผยแพร่ (ค.ศ.)2019

วารสารJournal of Thermal Analysis and Calorimetry (1388-6150)

Volume number135

Issue number2

หน้าแรก901

หน้าสุดท้าย910

จำนวนหน้า10

นอก1388-6150

eISSN1588-2926

URLhttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85045908804&doi=10.1007%2fs10973-018-7303-y&partnerID=40&md5=d13cceab88a9c3ecfb895e90d401088a

ภาษาEnglish-Great Britain (EN-GB)


ดูในเว็บของวิทยาศาสตร์ | ดูบนเว็บไซต์ของสำนักพิมพ์ | บทความในเว็บของวิทยาศาสตร์


บทคัดย่อ

This paper assesses the contribution of TiO 2 nanoparticles on thermal performance of a 0.5 mass% aqueous solution of carboxymethyl cellulose (CMC) in a square channel. In this regard, a neural network model is firstly developed for modeling of power law index, consistency index, and thermal conductivity of the aqueous solution of TiO 2 /CMC-water non-Newtonian nanofluid in terms of the nanoparticle concentration and temperature. Then, an attempt is made to evaluate the friction factor and heat transfer coefficient relative values. According to the results, it is found that the friction factor ratio is directly proportional to the temperature and nanoparticle content, while it inversely varies relative to the shear rate. Moreover, heat transfer coefficient ratio is improved at elevated nanoparticle content, and this improvement is much more profound at higher temperature conditions. For practical purposes, the nanofluid hydrothermal performance index is examined since the addition of nanoparticles increases both heat transfer and friction factor. The corresponding data disclose that the performance index is directly proportional to the nanoparticle content, especially at decreased shear rate and elevated temperature conditions. The application of TiO 2 /CMC-water nanofluid is found to be more favorable for applications with elevated shear rate conditions. ฉ 2018, Akad้miai Kiad๓, Budapest, Hungary.


คำสำคัญ

Non-Newtonian nanofluidSquare channel


อัพเดทล่าสุด 2023-25-09 ถึง 07:36