Strengthening mechanisms in Al–Ni–Sc alloys containing Al3Ni microfibers and Al3Sc nanoprecipitates

บทความในวารสาร

ผู้เขียน/บรรณาธิการ

กลุ่มสาขาการวิจัยเชิงกลยุทธ์

ไม่พบข้อมูลที่เกี่ยวข้อง

รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่ง: Suwanpreecha C., Toinin J.P., Michi R.A., Pandee P., Dunand D.C., Limmaneevichitr C.

ผู้เผยแพร่: Elsevier

ปีที่เผยแพร่ (ค.ศ.): 2019

วารสาร: Acta Materialia (1359-6454)

Volume number: 164

หน้าแรก: 334

หน้าสุดท้าย: 346

จำนวนหน้า: 13

นอก: 1359-6454

eISSN: 1873-2453

URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85056182972&doi=10.1016%2fj.actamat.2018.10.059&partnerID=40&md5=1e0dce9abfbb3eed604b154d58544179

ภาษา: English-Great Britain (EN-GB)

ดูในเว็บของวิทยาศาสตร์ | ดูบนเว็บไซต์ของสำนักพิมพ์ | บทความในเว็บของวิทยาศาสตร์

บทคัดย่อ

Dilute Al–Sc alloys (<0.4 wt% Sc) are creep-resistant up to ∼300 °C owing to coherent, nanosize Al3Sc particles created by solid-state precipitation. By contrast, eutectic Al–Ni alloys (Al-6 wt.% Ni) derive their high strength at elevated temperature from Al3Ni microfibers formed during solidification. Here, we investigate ternary Al–6Ni-0.2Sc and Al–6Ni-0.4Sc alloys with both types of strengthening precipitates (Al3Sc and Al3Ni) and compare them to binary Al–6Ni, Al-0.2Sc and Al-0.4Sc alloys with a single population of precipitates. Kinetics of Al3Sc and Al3Ni precipitation and coarsening are studied via hardness measurements during isochronal and isothermal aging; the two phases resist coarsening up to 475 and 350 °C, respectively, upon short term exposures (1 h isochronal steps). No noticeable effect of Sc is observed on the Al3Ni micro-fiber composition and hardening in the alloy. Similarly, Ni does not significantly affect the hardening provided by the Al3Sc precipitates, despite the presence of 0.14–0.17 at.% Ni in the Al3Sc nano-precipitates. The strengthening contributions of the Al3Ni and Al3Sc phases at ambient temperature are cumulative in the ternary alloys. For creep deformation at 300 °C, all alloys show a creep threshold stress, indicating that both types of precipitates impede dislocation motion. The ternary Al–Ni–Sc alloys show higher creep threshold stresses than their binary counterparts, also consistent with cumulative strengthening effects of precipitation strengthening (from Al3Sc nano-precipitates) and load transfer (from Al3Ni micro-fibers). © 2018 Acta Materialia Inc.

คำสำคัญ

Aluminum alloys, Atom probe tomography, Load transfer