Tribological properties of sintered graphite-steel composites containing lignite bottom ash
Conference proceedings article
ผู้เขียน/บรรณาธิการ
กลุ่มสาขาการวิจัยเชิงกลยุทธ์
ไม่พบข้อมูลที่เกี่ยวข้อง
รายละเอียดสำหรับงานพิมพ์
รายชื่อผู้แต่ง: Auechalitanukul C., McCuiston R., Saorerk C., Limsombutanan T., Jindajia E.
ผู้เผยแพร่: Trans Tech Publications
ปีที่เผยแพร่ (ค.ศ.): 2019
Volume number: 798 KEM
หน้าแรก: 140
หน้าสุดท้าย: 145
จำนวนหน้า: 6
ISBN: 9783035714296
นอก: 1013-9826
eISSN: 1662-9795
ภาษา: English-Great Britain (EN-GB)
บทคัดย่อ
Lignite bottom ash is an industrial byproduct from the combustion of lignite coal in electric power plants. The ash is composed of various hard metal oxides, and therefore may be suitable for use as a low cost friction modifier in friction materials. This research studied the effect of lignite bottom ash additions (up to 20 weight percent) on the tribological properties of a graphitesteel composite (5 weight percent graphite and 95 weight percent high carbon steel). The powder compositions were uniaxially pressed with 300 MPa applied pressure to produce disc shaped samples. The samples were sintered at 1,100 ฐC for 30 minutes in a reducing atmosphere of 90 percent nitrogen and 10 percent hydrogen. The friction coefficients were measured using a ball-ondisc tribometer. It was found that the addition of bottom ash increased the friction coefficients of the samples due to the increased abrasiveness provided by the bottom ash. The density of the samples was reduced due to the lower theoretical density of the bottom ash compared to the steel that it replaced. The hardness of the samples were found to be independent of the amount of lignite bottom ash, possibly as a result of a hard particle reinforcement effect. ฉ 2019 Trans Tech Publications, Switzerland.
คำสำคัญ
Friction modifier, Sintered steel
ติดต่อสอบถามเพิ่มเติมได้ที่