Evaluation of the potential of refuse-derived fuel recovery in the open dump by resistivity survey prior to mining

บทความในวารสาร

ผู้เขียน/บรรณาธิการ

กลุ่มสาขาการวิจัยเชิงกลยุทธ์

รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่ง: Chungam B., Vinitnantharat S., Towprayoon S., Suanburi D., Buddhawong S., Wangyao K.

ปีที่เผยแพร่ (ค.ศ.): 2021

Volume number: 23

Issue number: 4

หน้าแรก: 1320

หน้าสุดท้าย: 1330

จำนวนหน้า: 11

นอก: 14384957

URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85103409108&doi=10.1007%2fs10163-021-01207-6&partnerID=40&md5=b08f5f50538988406ead1b4926c449e7

ภาษา: English-Great Britain (EN-GB)

ดูในเว็บของวิทยาศาสตร์ | ดูบนเว็บไซต์ของสำนักพิมพ์ | บทความในเว็บของวิทยาศาสตร์

บทคัดย่อ

Currently, there is no technique to characterise the waste composition that can be processed into refuse-derived fuel in the open dumpsite. This study’s objective is to investigate the feasibility of applying resistivity measurements to evaluate waste composition in the open dumpsite. Electrical resistivity surveys were performed in two open dumpsites. One hundred waste samples were collected from both sites to classify the composition. The relation between resistivity and waste composition was then studied. The result showed a high correlation between resistivity and the composition of plastic (r2 = 0.809), characterising the waste in the dumpsite. The waste with resistivity values range 0.1–80 Ωm, 80–250 Ω·m and above 250 Ωm have compositions of plastic equalling 25–35%, 30–45% and above 40%, respectively. This finding can be used as a guideline to characterise the waste composition before mining. The resistivity measurement provides a reliable result but is labour-intensive. © 2021, Springer Japan KK, part of Springer Nature.

คำสำคัญ

Dumpsite, Electrical resistivity tomography, landfill mining, Refuse-derived fuel