Experimental and numerical failure analyses of dissimilar material joints between aluminium and thermoplastic
บทความในวารสาร
ผู้เขียน/บรรณาธิการ
กลุ่มสาขาการวิจัยเชิงกลยุทธ์
รายละเอียดสำหรับงานพิมพ์
รายชื่อผู้แต่ง: Wannapa N., Uthaisangsuk V.
ผู้เผยแพร่: Elsevier
ปีที่เผยแพร่ (ค.ศ.): 2020
วารสาร: Composite Structures (0263-8223)
Volume number: 252
นอก: 0263-8223
eISSN: 1879-1085
ภาษา: English-Great Britain (EN-GB)
ดูในเว็บของวิทยาศาสตร์ | ดูบนเว็บไซต์ของสำนักพิมพ์ | บทความในเว็บของวิทยาศาสตร์
บทคัดย่อ
In the automotive industries, joining of dissimilar materials has extensively attracted interest, because combinations of various lightweight materials in car bodies becomes more significant in order to achieve the most optimum design. On the other hand, several techniques for hybrid assembly have been continuously developed. In this work, aluminium sheets A5052 were joined with PBT-30GFR using two different methods, namely, hot pressing and adhesive bond. Then, resulted load carrying capacities were evaluated by means of single-lap joint (SLJ) specimens and occurred failure mechanisms were examined. Effects of surface treatments for aluminium samples on the strength of SLJ samples were also studied. Furthermore, FE simulations of single-lap shear tests were performed, in which cohesive zone (CZ) model was applied for representing the separation and subsequent failure behaviour of SLJ specimens. The parameters of the traction-separation law were individually determined for each joining techniques by mode-I and mode-II fracture toughness tests. Afterwards, force-displacement curves, maximum loads and failure occurrences of SLJ specimens with different overlap lengths were predicted. It was found that the proposed FE models and CZ parameters could correctly describe the experimental results of both joining methods. © 2020 Elsevier Ltd
คำสำคัญ
Adhesive bond, Dissimilar materials joint, Single-lap joint
ติดต่อสอบถามเพิ่มเติมได้ที่