Graphene oxide and carboxymethylcellulose film modified by citric acid for antibiotic removal

บทความในวารสาร

ผู้เขียน/บรรณาธิการ

กลุ่มสาขาการวิจัยเชิงกลยุทธ์

รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่ง: Juengchareonpoon K., Wanichpongpan P., Boonamnuayvitaya V.

ผู้เผยแพร่: Elsevier

ปีที่เผยแพร่ (ค.ศ.): 2021

Volume number: 9

Issue number: 1

นอก: 2213-3437

eISSN: 2213-3437

URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85100078896&doi=10.1016%2fj.jece.2020.104637&partnerID=40&md5=a9497a85c2e7f7b6732fe2e1c23e9a0b

ภาษา: English-Great Britain (EN-GB)

ดูในเว็บของวิทยาศาสตร์ | ดูบนเว็บไซต์ของสำนักพิมพ์ | บทความในเว็บของวิทยาศาสตร์

บทคัดย่อ

Recently, nanomaterials have been widely developed for water purification. In this work, graphene oxide and carboxymethylcellulose (GO-CMC) nanocomposites in films were modified with citric acid crosslinks. The films were prepared by a simple method involving solution mixing, evaporation, and immersion. They were characterized by XRD, FT-IR, XPS, and TGA. The swelling ratio of the film depends on the amount of graphene oxide and the concentration of citric acid. The adsorption behavior of antibiotics was studied in batch experiments as a function of contact time, graphene oxide content, initial pH value, initial concentration, temperature, and recyclability of the adsorbent. The results showed that the maximum adsorption capacity for oxytetracycline, oxolinic acid, and trimethoprim (as calculated by the Langmuir isotherm model) was 102.05, 256.68, and 370.93 mg g-1, respectively, at 30°C. The GO-CMC film exhibited stable and high reusability over five cycles. © 2020 Elsevier Ltd.

คำสำคัญ

Oxolinic acid, Trimethoprim