Laser surface masking of stainless steel for electrochemical machining process

บทความในวารสาร

ผู้เขียน/บรรณาธิการ

กลุ่มสาขาการวิจัยเชิงกลยุทธ์

รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่ง: Kaewsaard P, Zhu H, Qi H, Tangwarodomnukun V

ผู้เผยแพร่: Springer

ปีที่เผยแพร่ (ค.ศ.): 2021

วารสาร: International Journal of Advanced Manufacturing Technology (0268-3768)

Volume number: 116

Issue number: 3-4

หน้าแรก: 1141

หน้าสุดท้าย: 1150

จำนวนหน้า: 10

นอก: 0268-3768

eISSN: 1433-3015

URL: https://link.springer.com/article/10.1007/s00170-021-07465-w

ภาษา: English-Great Britain (EN-GB)

ดูในเว็บของวิทยาศาสตร์ | ดูบนเว็บไซต์ของสำนักพิมพ์ | บทความในเว็บของวิทยาศาสตร์

บทคัดย่อ

This paper presents the use of a nanosecond pulse laser for masking the AISI316L stainless steel surface prior to the electrochemical machining process. The laser-masked surface was prepared with an attempt to grow a chromium oxide layer as a passive mask for the selective electrochemical machining process. The effects of laser power, traverse speed, and scan overlap on the roughness, surface height, and chemical composition of laser-masked region were investigated in this study. The influence of electric current and electrochemical etching time on the machined surface morphology was also examined in the experiment. The results showed that using the laser power of 3-4 W associated with the laser traverse speed of 30-50 mm/s can provide the oxide mask with low roughness on the stainless steel surface. The electrochemical machining rate of laser-masked surface was only 0.16 mu m/s, while the removal rate of unmasked surface was 0.36 mu m/s. Although there was no significant difference between the scan overlaps on the obtained surface roughness, the 0% overlap was suggested to keep the surface masking time and total heat input toward the workpiece at minimum.

คำสำคัญ

Electrochemical machining, Laser, Masking, Stainless steel, Surface morphology