Mechanical and microstructural properties of dredged sediments treated with cement and fly ash for use as road materials

Journal article


Authors/Editors


Strategic Research Themes


Publication Details

Author listJamsawang P., Charoensil S., Namjan T., Jongpradist P., Likitlersuang S.

PublisherTaylor and Francis Group

Publication year2021

JournalRoad Materials and Pavement Design (1468-0629)

Volume number22

Issue number11

Start page2498

End page2522

Number of pages25

ISSN1468-0629

URLhttps://www.tandfonline.com/doi/full/10.1080/14680629.2020.1772349


View in Web of Science | View on publisher site | View citing articles in Web of Science


Abstract

Dredged sediments excavated or removed from reservoirs are classified as waste materials. The reuse of dredged sediments as road materials is an interesting solution to environmental problems. However, only the
compaction technique without treatment by admixtures is insufficient to improve the strength and stiffness of the dredged sediments for use as standard road materials. This research presents the mechanical and
microstructural properties of dredged sediments treated with ordinary Portland cement (OPC) and fly ash (FA). A large amount of FA was utilised for the purpose of cost-effectiveness. The dredged sediments were mixed with 1.5%–5% OPC and 5%–20% using exclusively OPC, exclusively FA and a combination of OPC and FA. The experiments in this study consisted of unconfined compressive strength, splitting tensile strength, California bearing ratio, resilient modulus, and ultrasonic pulse velocity tests. The results showed that the mechanical properties were improved by the addition of FA and that the maximum values of these properties were observed with a combination of 5% OPC and 10% FA. In addition to evaluating the mechanical properties, microscale analyses were also conducted using scanning electron microscopy and energy-dispersive X-ray spectroscopy to understand the behaviour of the dredged sediment with respect to the OPC and FA contents. Finally, stabilised sediments were assessed for possible reuse as road materials based on the Department of Highways of Thailand standard as well as the recommendations of the AASHTO Mechanistic- Empirical Pavement Design Guide and Austroads (2017)


Keywords

Dredged sedimentMicrostructureresilient modulusRoad materialstabilisation


Last updated on 2023-17-10 at 07:36