An Operando X-ray Absorption Spectroscopy Study on Sensing Characteristics of Vertically Aligned ZnO Thin Film for Methane Gas Sensors
บทความในวารสาร
ผู้เขียน/บรรณาธิการ
กลุ่มสาขาการวิจัยเชิงกลยุทธ์
รายละเอียดสำหรับงานพิมพ์
รายชื่อผู้แต่ง: Duangmanee, Suriya; Poo-Arporn, Yingyot; Janphuang, Pattanaphong; Leuasoongnoen, Pimchanok; Tonlublao, Surangrat; Kamonpha, Phitsamai; Saengchai, Natawan; Chanlek, Narong; Saisombat, Chatree;Kidkhunthod, Pinit; Poo-Arporn, Rungtiva P.;
ผู้เผยแพร่: MDPI
ปีที่เผยแพร่ (ค.ศ.): 2022
ชื่อย่อของวารสาร: Nanomaterials
Volume number: 12
Issue number: 8
หน้าแรก: 1285
eISSN: 2079-4991
ภาษา: English-Great Britain (EN-GB)
ดูในเว็บของวิทยาศาสตร์ | ดูบนเว็บไซต์ของสำนักพิมพ์ | บทความในเว็บของวิทยาศาสตร์
บทคัดย่อ
In this work, a simple, facile growth approach for a vertically aligned ZnO thin film is fabricated and its application towards methane gas sensors is demonstrated. ZnO thin film was prepared by a combination of hydrothermal and sputtering methods. First, a ZnO seed layer was prepared on the substrate through a sputtering technique, then a ZnO nanorod was fabricated using a hydrothermal method. The surface morphology of the ZnO film was observed by scanning electron microscopy (SEM). A ZnO nanorod coated on the dense seed layer is clearly visible in the SEM image. The average size of the hexagonal-shaped ZnO rod was around 50 nm in diameter, with a thickness of about 1 mm. X-ray absorption near-edge structures (XANES) were recorded to characterize the structural properties of the prepared film. The obtained normalized Zn K-edge XANES of the film showed the characteristic features of ZnO, which agreed well with the standard ZnO sample. The measurement of Zn K-edge XANES was performed simultaneously with the sensing response. The results showed a good correlation between sensor response and ZnO structure under optimal conditions. © 2022 by the authors. Licensee MDPI, Basel, Switzerland.
คำสำคัญ
Gas sensor, operando XAS