An analysis of the mechanical characteristic on welding junction of Resistance Spot Welding

Conference proceedings article

ผู้เขียน/บรรณาธิการ

กลุ่มสาขาการวิจัยเชิงกลยุทธ์

ไม่พบข้อมูลที่เกี่ยวข้อง

รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่ง: Mongkolkaset P., Mungkung N., Pearsura P., Chanthasrila Y., Srihamongkhol T., Utsahasai A., Thungsuk N., Yuji T.

ผู้เผยแพร่: Hindawi

ปีที่เผยแพร่ (ค.ศ.): 2010

หน้าแรก: 337

หน้าสุดท้าย: 341

จำนวนหน้า: 5

ISBN: 9789604742332

eISSN: 1745-4557

URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-78650790441&partnerID=40&md5=e0aee9cf4f453141cb9e9e640b2c8538

ภาษา: English-Great Britain (EN-GB)

บทคัดย่อ

This research was to investigate the performance of Resistance Spot Weld. The investigation consists of 3 conditions which are the samples with proper cleaning, with noxrust on surface and electrode deformation which the real condition in industrial. The specimen was mild steel sheet metal. The welded specimens were tested by tensile shear testing according to JIS Z 3136: 1999 and macro structure testing according to JIS Z 3139: 1978. It was found that the samples have the resistance between 0.30-0.36 milliohm when are considered by tensile shear force, diameter nugget size and penetration ratio. The specimens have the resistance more than 0.36 milliohm can be predict it will be coat with noxrust or dust on surface. The noxrust will affect on the specimens defect tensile shear force decline or over penetration ratio. The samples have the resistance less than 0.30 milliohm can be predict that it has a lower accepted standard of diameter nugget size or penetration ratio more than 80% that are caused by the bigger size of electrode or time current not enough. The resistance value of three conditions had significant different at P<0.05.

คำสำคัญ

Resistance measurement, Tensile shear testing