Comparative evaluation of autothermal reforming of biogas into synthesis gas over bimetallic Ni–Re/Al2O3 catalyst in fixed-bed and coated-wall microreactors: A computational study

บทความในวารสาร


ผู้เขียน/บรรณาธิการ


กลุ่มสาขาการวิจัยเชิงกลยุทธ์

ไม่พบข้อมูลที่เกี่ยวข้อง


รายละเอียดสำหรับงานพิมพ์

รายชื่อผู้แต่งBawornruttanaboonya K., Devahastin S., Mujumdar A.S., Laosiripojana N.

ผู้เผยแพร่Elsevier

ปีที่เผยแพร่ (ค.ศ.)2018

วารสารInternational Journal of Hydrogen Energy (0360-3199)

Volume number43

Issue number29

หน้าแรก13237

หน้าสุดท้าย13255

จำนวนหน้า19

นอก0360-3199

URLhttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85048549350&doi=10.1016%2fj.ijhydene.2018.05.086&partnerID=40&md5=6abdd1d41e2c5e5e42614e547fdf5cc5

ภาษาEnglish-Great Britain (EN-GB)


ดูในเว็บของวิทยาศาสตร์ | ดูบนเว็บไซต์ของสำนักพิมพ์ | บทความในเว็บของวิทยาศาสตร์


บทคัดย่อ

Autothermal reforming reaction of biogas over a novel Ni–Re/Al2O3 catalyst in a coated-wall microreactor was numerically investigated and compared with that in a fixed-bed microreactor having the same catalyst loading. The effects of inlet concentrations of O2 and H2O as well as temperature on the reaction effectiveness within both microreactors were, for the first time, assessed to determine an optimal condition, which yielded complete CH4 and CO2 conversions, H2/CO ratio of around one and minimal hot spot formation. Such an optimal condition was then used to study the effect of inlet reactant Reynolds number on the reactor performance. Higher CH4 and CO2 conversions, lower H2O production and less hot spot formation were noted in the case of the coated-wall microreactor. The optimal condition occurred at CH4:CO2:O2:H2O ratio of 39:26:30:5% (v/v) and inlet temperature of 740 °C. The performance of the coated-wall microreactor was superior to that of the fixed-bed microreactor in all cases. © 2018 Hydrogen Energy Publications LLC


คำสำคัญ

Heterogeneous reactionsMicroreactorsReforming reactiontransport phenomena


อัพเดทล่าสุด 2023-18-10 ถึง 07:43